1. Architectural Shingles

RUBEROID TORCH  MEMBRANE is a tough, resilient modified bitumen membrane manufactured to stringent GAF specifications. Its core is a strong, resilient, non-woven polyester mat that is coated with weather resistant, APP polymer modified asphalt. The membrane is available with smooth surface.
Uses:
RUBEROID TORCH  MEMBRANE is designed for new roofing and re-roofing applications as well as flashings. RUBEROID TORCH  MEMBRANE is also an ideal product for repairs of built-up roofing membranes or other modified bitumen systems.
Advantages:
- Typical system guarantees available for up to 15 years.
- Cost effective — the installed cost of RUBEROID Torch Smooth Membrane is less than most single-ply                 systems on the market today
- Lightweight — installed roof designs weigh less than 2 pounds per square foot
- Resilient — RUBEROID TORCH  MEMBRANE's polyester mat core allows it to resist splits and tears due to its       pliability and elongation characteristics
- Durable — specially formulated modified asphalt for lasting performance
- Allows to apply coatings to extend the life.

2.Flat roof (low slope)

When dealing with an old shingle roof or it has more than one layer of roofing material on the deck, the contractor should strip the old materials off.
Also, when leaking is a problem, stripping the roof is the best option again.

A roof replacement usually involves distinct steps. Here is a typical installation process for a composite or asphalt shingle roof:
- Remove old roofing materials, if necessary. This is the part where pieces of roofing may go flying.
   It usually involves shovels and special tools for pulling up the old materials. 
   The roofer will clean up the mess.
- Inspect roof deck for rot or leaks. Replace as needed. Keeping the roof deck solid will make any roof                              materials applied last longer.
- Install underlayment. For an asphalt shingle roof, the usual underlayment material ice and water shield.

- Snap a chalk line. When applying shingles, a straight line will keep it visually appealing and make the                            roofing system solid.
- Install shingles. The first line of shingles is the most important. Following the chalk line, the roofer lays                          down this first course. It provides the foundation for the later courses.
- Custom fit around chimney and vents. As the roofer approaches vents and chimneys, the roofing materials                    needs cut and formed. Sometimes flashing is necessary.
- Complete ridge line. Once all the shingles are in place along the sides. The roofer will apply a series of                            specially cut shingles along the ridge line to cover the peak of the roof and give a solid cap.

These steps are a simplified list of what a contractor does on a job. Generally on a normal house a complete roof replacement can take two to four days depending on complexity and roofing materials.

CHeck out our newest services – Your HOME COULD BE AT RISK

 

Can you roof withstand every storm? If you're not sure, or you have an aging roof that's been well weathered, have one of our inspectors come out and take a look.

 

It's very possible you're subject to further damage without proper flashing installed.

ENERGY EFFICIENCY


Ridge vent or solar power fan.

ROOF FLASHING



  • Gorgeous architectural options available

  • Discreet business options available

  • Attractive economy options available

  • Our roofing earns the highest ratings

  • Exceeding industry standards in installations

  • Full guarantee from start to finish

  • Our roofing earns the highest ratings

  • Exceeding industry standards in installations

  • Full guarantee from start to finish

  • Full cleanup after installation

New Service

Featured Service

Man providing services by our roofing companies in Holland, PA
TAKE IT FROM THE EXPERTS - A GOOD ROOF IS THE FOUNDATION OF A GOOD HOME

 

Making sure your roof is sound and secure is incredibly important, yet many homeowners neglect their roofs. Like everything in your home, it requires maintenance.


If you haven't had your roof inspected recently, we're here to help. Maintaining your roof is a low-cost way of ensuring that your home – and your family – stay safe. 

   

  • Shingle roofs                       

  • Flat roofs

  • Modified roofs

  • Tile roof

  • Fiberglass roofs

  • Green roofs

  • Coatings

  • Inspections

  • Quotes

  • Licensing

  • Repairs

  • Restorations

  • Site Cleanup

services list

Services by Our Roofing Companies in Holland, PA